Got a damaged drain system? Replace it with a trenchless sewer line, and you no longer have to dig!
Excavating and replacing damaged pipes can be a daunting task, not to mention expensive. But if you go for trenchless sewer lines, you don’t have to dig the yard. Instead, you can install smaller, new pipes into the existing pipes through either sip-lining or pipe bursting. You can DIY the process, but it is still best if you let a professional do the job.
In case you decide to DIY your trenchless sewer line installation in Salt Lake City, here are some preparation tips for you:
Know the local codes.
Before you do any work to your sewage system, check the local building codes. It is vital that your installation will meet these codes so you can avoid any further complications.
Check the Ground for Obstructions.
Rent a sewer pipe locator tool and check the ground for any obstructions. It is safe to inspect the ground for any wiring or other pipes that you must avoid when installing the trenchless sewer line.
Look for leaks.
Usually, the trenchless sewer line won’t work if there are leaks on some of the existing pipes. Pro Tip: If there’s a wet spot on your lawn, it means there’s a hole in your drain lines. Dig that section of line and replace the pipes. Make sure to do that before installing the trenchless sewer line.
Get rid of the tree roots close to the line.
Even if you have a new trenchless sewer installed, your system is still susceptible to damages if it gets intruded with tree roots. So before working on the installation, make sure that there are no large tree roots near the line.
Trenchless sewer line installation comes with many benefits, but it requires a lot of work. So, make sure you don’t waste every work by preparing well for the entire job. But if you want to achieve a smooth, stress-free installation, it won’t hurt to hire a professional plumber to do this job for you.