A Guide on Choosing the Right Pool Heat Pump

Posted on Mar 3 2017 - 1:00am by Home Gurus

Person inspecting a pumpSo you have a pool in your backyard, but sometimes in the colder months its too cold to take a short dip. Even in Perth, the rainstorms and winter temperatures can make a swim quite challenging. This is why buying a heat pump for your pool can be one of the best investments you can make.

In the warm, sunny climate of Perth, the cost of maintaining your swimming pool can be much less by keeping your pool water at a warmer temperature all year round. Pool Heat pumps are also less expensive to by and maintain than gas pool heaters and electric pool heaters.

How a Heat Pump Works

A pool heat pump is like a reverse cycle air conditioner. It takes the hot air from the outside surroundings and sends it through an evaporator coil, where a liquid refrigerant absorbs the heat and passes it through a compressor. The compressor increases the heat before sending the air to the condenser, where the heat is passed in to the pool water.

Choosing the Right Size

It’s very important to choose a heat pump to the correct size for your pool. If you choose an inadequately sized heater, it will take more time and energy to heat up your pool, leading to increased electricity costs. So before buying your heater, Pool Heat Pumps Perth recommends that you need to measure the size of your pool.

Suggested Article:  Types of Mattresses Fitted for Different Needs

Some manufacturers use British thermal units (BTU) to indicate the capacity of their heat pumps. Most heat pumps range somewhere between 50K BTUs to 120K BTUs. Smaller pools need heaters with lower BTUs. For instance, a 50K BTU heat pump is best for a small above ground swimming pool with approximately 45000 litres of water. If you’re not sure, it’s best to ask the pool heat pump provider to help you choose the one which is appropriate for your pool size.

The Right Features

There are various brands and models of pool heat pumps in the market, and many of them provide high-quality heating. At the very least, you should choose a heat pump with an environment-friendly R410A refrigerant, a thermoplastic exterior, and a titanium heat exchanger. Some models have more advanced features, but if you are on a budget, then choose one that could save you money, energy, and help you lower your costs.

You shouldn’t let the colder weather stop you from enjoying a swim or a dip in your pool. Buying a pool heat pump will help you maximise your swimming pool, and allow you to enjoy its pleasures all year round.

Suggested Article:  Dreading Water Damage? What You Should Understand