Safety Rules for Using Electrical Cords at Home

Posted on Apr 5 2017 - 1:00am by Admin

Tangled Electrical CordsElectrical cords could be very helpful and practical in providing power where you need it. But regardless of the cord’s rating or gauge, it’s only a temporary answer. It is also not appropriate as a permanent solution to your home’s electrical system.

With this in mind, here are some safety rules for inspecting and maintaining your electrical cords to prevent electrical shocks, fires, and other injuries.

Avoid Piercing the Cord’s Insulation

Don’t nail or staple cords or cord bundlers to surfaces like a wall or baseboard as this might pierce the insulation and lead to a fire hazard or electric shocks. You should also make sure that there’s no pressure or crimping on the cords, such as when you place them behind furniture or cramped spaces. This could also result in breaking down the cord’s insulation, warns an electrical service expert in Utah. Additionally, when you use cord bundlers like spiral wire wraps, don’t fit too many electrical cords together.

Proper Placement

Never leave electrical cords hanging in places where they could be easily tripped over or pulled down. You also shouldn’t run cords under carpets or rugs. This would prevent it from discharging heat and cause fire. If you have unprotected electrical cords, keep them away from furniture and foot traffic to avoid tripping, overheating, and fraying.

Suggested Article:  Streamlined and Clean: Using Recessed Lighting to Make Interiors More Stunning

Don’t Overload Power Outlets

Refrain from overloading electrical cords and outlets with multiple appliances or appliances with high wattage such as microwave ovens or space heaters. Always check the maximum capacity of your electrical cords and ensure that you do not surpass it. Also, you shouldn’t use extension cords to plug several items; rather, get one that’s long enough for your needs.

Prevention is Key

You could also do the following as preventive measures. First, don’t use a cord that’s significantly hotter to touch than usual. Second, never use adapters to fit electrical cords into 2-prong electrical outlets that require 3-prong electrical plugs. Finally, don’t use a cord for plugging into a power strip; rather, purchase a power strip with a lengthier cord.

Utilizing electrical cords properly is immensely vital to you and your family’s safety. Keep these in mind, and you reduce the risk of electrical fires, shocks, and related accidents.